POF USA Revolt Light Gen4 5.56 NATO 18.5" Bolt Action

$2,029.99 $1,199.99
Availability: In stock

Part AR-15, part bolt-action, all POF-USAReVoltbolt-action rifles feature our Gen 4 ambidextrous lowers, innovative bolt-action design, and our M-LOK compatible M Rail. The ReVolt shares the look and fire control operations that you are used to in a standard AR platform rifle. Minimize your training time, maximize your efficiency. Pure POF-USA quality and performance, purpose-built for those demanding more out of their bolt-action rifles. A perfect choice for hunters and Law Enforcement; and with the change to a captive pin at the factory, it’s legal in all 13 Colonies – even where the Tories live.

E2 DUAL-EXTRACTION TECHNOLOGY: POF’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.

NITRIDE HEAT-TREATED FLUTED BARREL & TRIPLE PORT MUZZLE BRAKE: Proper gas regulation and lubricated mechanics are nothing without the precision and durability of a quality barrel. Our chrome alloy barrels are machined for absolute accuracy. Our barrels are nitride heat-treated for full corrosion resistance. Designed to precisely compliment the POF platform our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut.

DROP IN EFP (ENHANCED FINGER PLACEMENT) TRIGGER: The Enhanced Finger Placement (EFP) trigger introduces a forward design that naturally guides the tip of your finger to the same resting place for a precise, smooth, consistent trigger pull every single time. This single stage, non-adjustable drop-in trigger boasts a crisp 4.0 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF triggers come with KNS Precision stainless steel non-rotating anti-walk pins specifically designed for our ambidextrous lower receivers.

OVERSIZED HEAT SINK BARREL NUT: The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.

MODULAR RAILED RECEIVER: The patented Modular Railed Receiver (M.R.R) is POF’s crown jewel for precision and extreme rigidity. This is a two piece upper assembly with a free-floating monolithic handguard that slides on and interfaces directly to the upper assembly thanks to our upper’s reinforced backbone. This backbone is five-times thicker than standard flattop platforms. The suspended handguard keeps your grip and accessories from weighing on the barrel and with the help of our wedge block, reduces stress and flex in the barrel extension area. This ensures both extreme rigidity and accuracy by directing stress risers toward the upper assembly’s strongest, most reinforced materials.

BOLT CARRIER GROUP & ROLLER CAM PIN: Our one piece NP3 plated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action. Roller Cam Pin. Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.

0 stars based on 0 reviews